To choose storage shelving, start with the largest and heaviest items, how people will put them away and retrieve them, and the space available for installation. Then confirm the usable shelf dimensions, the load rating for the exact configuration and the shelf surface that suits the goods and the environment.

Start with How the Goods Are Stored
For cartons, bins, tools and parts placed onto shelves by hand, start with a floor-standing shelving system. If a forklift or reach truck will place complete pallets onto raised levels, specify pallet racking around the pallets, equipment and site. See the comparison of industrial shelving and warehouse racking.
Warehouse and garage applications can use similar shelving, but the checks that determine a good fit often differ. Use the actual stock and site conditions to confirm the choice.
| Check | Warehouse or stockroom | Garage or workshop |
|---|---|---|
| Goods and access | Carton and bin sizes, picking frequency and room to replenish stock | Mixed-size tools and cases, access to frequently used items |
| Available space | Row length, columns and working aisles | Wall space, door travel and clearance around vehicles or workbenches |
| Storage conditions | Floor condition and any cleaning or moisture exposure | Floor condition, damp areas and likely contact with wet items |
| Order requirements | Repeatable bay dimensions, shelf positions and parts | Assembly space, installation instructions and any retail packing requirements |
If limited floor space calls for ceiling-mounted storage, or the unit needs to fold away, check the installation and use conditions for that format separately. See the Garage & Utility Storage range.
Measure Usable Shelf Space and Clearances
Record the maximum overall width × depth × height in millimetres. Include skirting boards, sockets, columns and other obstructions. Check the route into the room, space to assemble the unit and room to lift goods onto the shelves. In a garage, check access with the vehicle parked and the doors in use.
Ask for the usable shelf width and depth, and the clear opening between levels. Include room to grip or tilt a bin during removal. An extra level is useful only if the intended goods can still be placed and retrieved comfortably.
Illustrative example. A unit listed at 450 mm overall depth may have less usable shelf depth. If a bin is 430 mm deep, confirm that its base fits the usable shelf surface and that there is room to pull it out. Use the supplier’s drawing or a representative assembled sample to check the fit.
Where a storage run turns through 90 degrees, use the boltless corner shelving dimensions to check both wall-side lengths, shelf depth and front access before drawing the layout.

Check Shelf and Bay Load Ratings
Ask the supplier to confirm the rated load per complete shelf level and the permitted total load for the unit or bay. Check that the figures apply to the quoted width, depth, shelf positions, frame, panels and supports. When a supplier advertises an upper rating, ask which configuration achieves it and what applies to the version you are buying.
A uniformly distributed load (UDL) assumes that weight is spread evenly across the shelf. A compact machine or a heavy item resting on small feet can load a much smaller area. Give the supplier the maximum item weight, its contact footprint and where it will sit. Include the planned load across all occupied levels so the total bay load can be checked separately. See the guide to steel shelving load capacity.
For US warehouse operations, OSHA’s warehousing guidance also covers where to place heavier items and the need to stay within rated capacities.
Match Shelf Materials to the Goods and Environment
MDF and chipboard provide a continuous surface for cartons, bins and small packages. For a dry indoor application, confirm the board type and supports for the quoted load. If the site is damp or items are likely to be put away wet, ask about the permitted exposure before specifying board shelves.
Formed steel panels are an option when a continuous metal surface is wanted. Wire shelves can suit goods with a base that rests securely on the grid. Check the mesh opening and how small feet or narrow items will be supported. Confirm any liner or alternative panel with the supplier, including the rating for the resulting configuration.
Review the shelf, frame finish and supporting parts together. Availability of galvanised components or powder-coated colours depends on the chosen model. Confirm the finish on the actual components and its suitability for the expected conditions.

Confirm the Frame and Assembly Method
Check the upright and beam connection, the bracing and the parts that support each shelf. For a new wholesale model or a repeat order with changes, a representative sample can show whether the panels seat properly, the parts match the instructions and the assembled dimensions suit the available space.
Ask for the assembly instructions for the quoted configuration and check any wall or floor fixing requirements against the installation site. If boltless shelving is on the shortlist, use the boltless shelving selection guide to compare frame and panel configurations. Review the available models in the boltless shelving range.
Frequently Asked Questions
Can one shelving model serve both a warehouse and a garage?
Yes, if its usable dimensions, load rating, installation method and permitted conditions suit both sites. Check each application separately. A common product specification can still have different packing or labelling requirements for warehouse delivery and retail sale.
Can I add another shelf level later?
Ask the supplier to confirm the permitted positions, matching supports and total bay rating for the revised layout. Check the clear opening for the intended goods after the extra level is fitted.
Prepare Your Storage Shelving Requirements for a Quotation
Send QDDOWELL the information you have so the quote can identify a specific configuration.
- Goods and loading — item dimensions, maximum weights, how the weight is distributed and how goods will be handled.
- Space and layout — maximum overall dimensions, required usable depth, shelf levels and any access or fixing constraints.
- Order details — quantity, destination, preferred shelf material and finish, and any carton, label or pallet requirements.
State any choices that are still open. For repeat or private-label orders, identify the previous model and the details that are changing. Review the OEM shelving order guide for packing and approval details.
